HappyModel Mobula7 O4 2S 80mm Digital HD Micro FPV Whoop

Description The HappyModel Mobula7 O4 2S 80mm Digital HD Micro FPV Whoop redefines micro drone performance with its powerful RS1102 KV10000 motors and HQPROP 45mm propellers. Featuring the DJI O4 air unit, it delivers stunning HD footage and ultra-smooth flights. Designed for indoor and backyard freestyle, its lightweight frame, ExpressLRS receiver, and 2S battery support ensure exceptional stability, responsiveness, and a thrilling FPV experience in any small-space environment. Features: Equipment with New DJI O4 air unit 2S battery support Powerful and Smooth freestyle flying UART ExpressLRS receiver support stable control link Lighter and small for indoor FPV Spare Parts Specifications: Motor Mode: RS1102 KV10000 Configuration: 9N12P Stator Diameter: 11mm Stator Length: 2mm Shaft Diameter: Φ1.5mm Motor Dimension (Dia. × Len): Φ13.5mm × 14mm Weight: 2.8g No. of Cells (Lipo): 1-2S Propellers Weight: 0.33g Material: Polycarbonate Pitch: 0.9 Propeller Diameter: 45mm Hub Thickness: 5mm Shaft: 1.5mm Flight Controller MCU: STM32F405RGT6 (168MHz, 1Mbyte FLASH) GYRO Sensor: BMI270 (SPI connection) Mount Hole Size: 25.5mm × 25.5mm Power Supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A (each) Blheli_S 4-in-1 ESC Built-in Serial ExpressLRS 2.4G Built-in BMP280 Barometer Built-in 8MBp Blackbox Built-in Voltage Meter Sensor, Voltage Meter Scale: 110 Built-in Current Meter Sensor, Current Meter Scale: 470 Onboard 4-in-1 ESC Power Supply: 1-2S LiPo/LiPo HV Current: 12A continuous, peak 15A (3 seconds) Supports BLHeli_S Bluejay firmware Factory Firmware: Bluejay ESC V0.19 Firmware Target: Z-H-30 Default Protocol: DSHOT300 When using 1S battery and high KV 0702/0802 motors, set startup power to 1100/1200 Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate Options: 25Hz / 50Hz / 150Hz / 250Hz / 500Hz RF Frequency: 2.4GHz Antenna: Enameled copper wire, 31mm length Telemetry Output Power: <12dBm Default Firmware Version: ExpressLRS V3.0.1 Firmware Target: HappyModel EP 2400 RX Firmware can be updated via ExpressLRS Configurator DJI O4 Air Unit Weight: Air Unit (camera module included): Approx. 8.2g Transmission Module: 30 × 30 × 6mm (L × W × H) Camera Module: 13.44 × 12.36 × 16.50mm (L × W × H) Camera Cable Length: 50mm Coaxial Cable: 50mm 3-in-1 Cable: 50mm Operating Frequency: 5.170-5.250 GHz 5.725-5.850 GHz (Operating frequency varies by region. Refer to local regulations.) Transmitter Power (EIRP): 5.1 GHz: <23 dBm (CE) 5.8 GHz: <30 dBm (FCC) <14 dBm (CE) <30 dBm (SRRC) Live View Quality: 1080p at 30/50/60/100fps Package Includes: 1 x Happymodel M80 Frame 1 x CrazyF405HD ELRS flight controller firmware target:BETAFLIGHTF4 4 x RS1102 KV10000 brushless motor 1 x HQPROP 45MMX3 tri-blade propellers(4cw 4ccw) 1 x DJI O4 Air unit 1 x Canopy 1 x Screw driver Spare Parts (Not Included): Props: OEM: HappyModel HQProp 45MMX2 Propeller for Mobula7 O4 Alternative: HQProp 45MM 3-Blade Micro Whoop Propeller 1.5mm Alternative: Gemfan 45mm 3-Blade Micro Whoop Props 1.5mm Shaft (3 Colours) Battery options (xt30 compatible) Tattu R-Line 550mAh 7.4V 2S1P 95C Lipo Battery GNB LiPo Battery 7.6V 100C 550mAh 2S HV BetaFPV LAVA 7.6V 75C 550mah 2S HV AIO: HappyModel CrazyF405HD AIO Flight Controller 12A BLHeli_S Uart ExpressLRS Motors: HappyModel RS1102 KV10000 Brushless Motor for Mobula7 O4 Frame: HappyModel M80 Frame for Mobula7 O4 Antenna: HappyModel Dipole Antenna for Mobula7 O4 Version 2pcs